DEGREASER FOR CONCRETE FLOORS AND EQUIPMENT: FLOORS - Dilute with 1 to 2 ounces per gallon of water, depending upon soil to be cleaned. Apply to area to be cleaned. Scrub as necessary with brush or floor machine. Rinse thoroughly. Pick up with mop or wet vacuum.
GREASY EQUIPMENT AND PARTS - May be used undiluted or dilute as needed to remove any grease. Brush, wipe, or spray product onto soiled areas, agitate when necessary. Rinse thoroughly with clean water, preferably with high pressure. May damage some plastic and painted surfaces. Test on an inconspicuous areas first.
SEWAGE TREATMENT AND RENDERING PLANTS: May be used straight or prediluted with water before use. May be applied directly or set up on automatic drip for constant control.
DRAIN AND GREASE TRAPS: To unclog pour 8 ounces (1 cup) of product into drain and allow to stand for 1 hour. Flush with HOT water. To prevent grease build up; once a week pour 2 to 4 ounces of compound into drains and after flush with HOT water.
ODOR CONTROL: For general odor control, dilute 4 ounces of compound per gallon of water and spray refuse dumps, trash cans, dumpsters, etc.
Note: This is a Hazardous Material and CAN NOT be shipped UPS. You will need to speak to customer support personnel for accurate freight costs. 1-800-962-7498 8AM-5PM Mon-Fri - Consequently your Order Confirmation Email may not represent the correct cost of shipping.
